Field Controls UV-Aire 46511500 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 8

Field Controls UV-Aire 46511500 Скачать руководство пользователя страница 1

www.fieldcontrols.com

Please retain these instructions after installation.

This device

MUST

be installed by a qualified agency in accordance with the manufacturer's installation instructions. The definition of

a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged

in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the

precautions required, and has complied with all the requirements of the authority having jurisdiction.

This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or condition nor for

use in the mitigation, treatment, or prevention of any disease or condition.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.

Installation Date:

Installed By:

Phone:

UV-AIRE

®

AIR PURIFYING SYSTEM

Model: UV-16/120

The UV-Aire unit is designed to emit powerful UVC band light rays which sterilize and reduce airborne

microorganisms as they pass through a heating or air conditioning system. It is installed in the main supply

or return duct and operates continuously to automatically purify the air in the home 24 hours a day.

ITEMS INCLUDED IN KIT

1- UV-Aire Ballast Assembly & Power Cord

1- Mounting Base

1- Ultraviolet Lamp

6- Sheet Metal Mounting Screws

1- Instruction Sheet

1- Fiberglass Duct Board Mounting Bracket

1- UVC Light Shield

1
2
3
...
»

Содержание UV-Aire 46511500









Отзывы:

Нет отзывов