Field Controls Healthy Home System Trio-16 Скачать руководство пользователя страница 2

WARNING:

 

Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage 

or blindness.Never operate the Trio Air Purifying System out of the ductwork. Avoid touching the glass portion of the lamp with your hands.

Page 2 of 12

WARNING:  Never expose eyes or skin to UVC light from any source.

WARNING:  Never expose eyes or skin to UVC light from any source.

 •   Looking directly at the UVC light may cause permanent eye damage or blindness. 

 •   Looking directly at the UVC light may cause permanent eye damage or blindness. 
 •   Never operate the Trio Air Purifying System out of the plenum.

 •   Never operate the Trio Air Purifying System out of the plenum.
•   Designed for a closed duct system. Do not mount near a supply or a return air opening.

•   Designed for a closed duct system. Do not mount near a supply or a return air opening.
•   All duct openings in direct line of site of the UV light must be sealed with aluminum tape or equivalent 

•   All duct openings in direct line of site of the UV light must be sealed with aluminum tape or equivalent 
     sealing methods.

     sealing methods.

WARNING: UV light will break down plastic materials not rated for UV exposure:

WARNING: UV light will break down plastic materials not rated for UV exposure:

(Examples: wire insulation, fl ex duct, drain pans and humidifi ers)

(Examples: wire insulation, fl ex duct, drain pans and humidifi ers)

 •   The unit must be mounted at least 3" from the above stated type of materials.

 •   The unit must be mounted at least 3" from the above stated type of materials.

 •   If it is necessary to mount the unit in direct line of site of these types of materials, they must be shielded 

 •   If it is necessary to mount the unit in direct line of site of these types of materials, they must be shielded 
      with aluminum foil, aluminum foil tape, or sheet metal.

      with aluminum foil, aluminum foil tape, or sheet metal.

WARNING: DO NOT mount this unit outdoors.

WARNING: DO NOT mount this unit outdoors.

 •    This product is designed for indoor installation only (i.e. attics, crawl spaces, basements, etc.).

 •    This product is designed for indoor installation only (i.e. attics, crawl spaces, basements, etc.).

WARNING:  Never touch broken lamp or internal contents of lamp.  The lamp contains mercury.

WARNING:  Never touch broken lamp or internal contents of lamp.  The lamp contains mercury.

 •   After opening the carton, unpack and inspect the unit and lamp for damage.  Do not install this unit 

 •   After opening the carton, unpack and inspect the unit and lamp for damage.  Do not install this unit if any 

if any 

     damage is noticeable. If lamp is damaged, cracked or broken, do not touch lamp or other contents in 

     damage is noticeable. If lamp is damaged, cracked or broken, do not touch lamp or other contents in 
     carton. Close carton and return to seller immediately.

     carton. Close carton and return to seller immediately.

 •    In case of accidental exposure to internal contents of lamp, wash hands and any other aff ected 

 •    In case of accidental exposure to internal contents of lamp, wash hands and any other aff ected 
      skin area with mild detergent.  Remove aff ected clothing immediately.  If skin surface is pierced, seek  

      skin area with mild detergent.  Remove aff ected clothing immediately.  If skin surface is pierced, seek  
      medical attention immediately.

      medical attention immediately.

NOTE:  

NOTE:   If you touch the glass of the lamp, you should wipe the glass clean with isopropyl alcohol and 

 If you touch the glass of the lamp, you should wipe the glass clean with isopropyl alcohol and 

    

    

a lint free

a lint free wipe. If the lamp is not cleaned, the fi lm of hand oils causes a reduction in the light intensity.

 wipe. If the lamp is not cleaned, the fi lm of hand oils causes a reduction in the light intensity.

WARNING:    Before  installing  or  servicing  a  humidifi er,  air  fi lter,  HVAC  system,  or  this  unit,  etc.,  always 

WARNING:  Before installing or servicing a humidifi er, air fi lter, HVAC system, or this unit, etc., always 
turn  all  power  OFF  and  have  unit  unplugged.  Electrical  shock  can  cause  personal  injury  or  death.  Never 

turn all power OFF and have unit unplugged. Electrical shock can cause personal injury or death. Never 
expose eyes or skin to direct UVC light from any source.

expose eyes or skin to direct UVC light from any source.

WARNING: To prevent water damage or electric shock, do not mount unit under a humidifi er.

WARNING: To prevent water damage or electric shock, do not mount unit under a humidifi er.

WARNING:  This  product  is  designed  for  indoor  installation  only  (i.e.  attics,  crawl  spaces,  basements,  etc.).  

WARNING: This product is designed for indoor installation only (i.e. attics, crawl spaces, basements, etc.).  
For use on gas fi red, oil fi red, electric and split system heat pump forced air systems.*  This product is NOT 

For use on gas fi red, oil fi red, electric and split system heat pump forced air systems.*  This product is NOT 
designed to be mounted outside on gas fi red or heat pump packaged units.**

designed to be mounted outside on gas fi red or heat pump packaged units.**

Split system heat pumps are systems where the air handler and the air conditioning compressor are 

Split system heat pumps are systems where the air handler and the air conditioning compressor are 

    

separate units.

  

 

separate 

units.

** 

Packaged units are systems where the air handler and the air conditioning compressor are built together 

** 

Packaged units are systems where the air handler and the air conditioning compressor are built together 

    

and are installed outside of the building.

    

and are installed outside of the building.

P/N 780105101 11/20  Rev B

SAFETY CONSIDERATIONS

Содержание Healthy Home System Trio-16













Отзывы: