Field Controls DUO-11/24V Скачать руководство пользователя страница 1

www.fi eldcontrols.com

Please retain these instructions after installation.

This device MUST be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition of 
a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged 
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the 
precautions required, and has complied with all the requirements of the authority having jurisdiction.

This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or condition nor for 
use in the mitigation, treatment, or prevention of any disease or condition.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.

Installation Date:

Installed By:

Phone:

Models: DUO-11/24V, DUO-14/24V, PCUV-16UA

The Duo 24V models produce germicidal UVC Band light rays, which sterilize and reduce airborne 
microorganisms and reduce Volatile Organic Compounds (VOC’s) by a photocatalytic chemical reaction as 
air passes through a heating or air conditioning system.  It is installed in the main supply or return duct and 
operates continuously to automatically purify the air in the home 24 hours a day.

This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or 

condition, nor for use in the mitigation, treatment, or prevention of any disease or condition.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY 

BEFORE PROCEEDING WITH THE INSTALLATION.

 

  WARNING: For use with 24V ONLY! Do not exceed voltage rating. Severe damage to device and or fi re  

 

  could result.  Verify proper voltage.

ITEMS INCLUDED IN KIT:

1-24Volt UV-Aire Ballast Assembly
1-Photo-Catalytic Duct Insert
1-UVC Germicidal Lamp
4-Sheet Metal Mounting Screws
1-Instruction Sheet
1-Duct Board Mounting Bracket
1-24V Transformer 
2-Fork Terminals
2-Wire Nuts

PHOTO-CATALYTIC AIR PURIFIER SYSTEMS

Содержание DUO-11/24V









Отзывы: