Field & Stream PRIMETIME LITE HEH00557 Скачать руководство пользователя страница 10

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869

Customer Service Department 1-866-972-6168

www.treestandcustomerservice.com

CLIMBING INSTRUCTIONS

CAUTIOUSLY 

put your weight on the foot platform.

The additional weight will create tension on tree strap cables.

NOTE:
Images used are for demonstration purposes only and may not depict the actual product.

Have both top and bottom platforms 

angled down towards base of tree to 

compensate for a smaller tree 

diameter at desired hunting height.

FIG.1

FIG.2

C

O

FIG.3

Before beginning to climb: Check that your harness is secure, check that cables are properly quickclipped, 
and make sure that the seat straps on your seat section are off to the side, they should not obstruct the 
cable connecting to the tree in anyway while climbing.

Practice at ground level with you Full Body Harness.

Familiarize yourself with this product’s function so you feel comfortable with the climbing procedure.

1. Sit on shooting rest and lift your feet to raise foot platform. Push down to set foot platform in 
raised position. 

FIG.1

2. Stand and lift up on seat platform to adjust it to a comfortable level. Push down to set seat 
platform in raised position. Raise your harness tether to take up the slack. 

FIG. 2

3. Again, sit on shooting rest and lift you feet to raise foot platform. Push down to set foot 
platform in raised position. 

FIG.1

4. To continue climbing up tree, repeat steps 1 through 3. Continuously adjust your harness to 
keep strap above your head with minimum slack.

5. When you have reached the desired height to hunt from, wrap each Climber Buckle

  O  

around each cable in the front of the tree. 

FIG.3 

Thread the strap through the buckle and pull 

tight. 

(See Buckle Instructions)

. The straps should be in front of the tree and 

NOT 

wrapped 

around the tree. Pull excess slack through buckle, this will lock the platforms into place on the 
tree.

6. Carefully remove one foot at a time from the foot straps. Slowly turn around never taking both feet off of the foot platform, you 

MUST 

always have weight pressed on the foot platform.

7. Sit on the seat cushion, if any adjustment needs to be made to the seat placement, you 

MUST 

climb back to the ground and adjust on the 

ground. Using a safe hoist/lift system, raise your unloaded weapon.

8. To climb back down the tree, reverse the process, always ensuring you are constantly adjusting your harness tether as you move.

©2011 (rev 12/10)

Содержание PRIMETIME LITE HEH00557
















Отзывы: