manualshive.com logo in svg

Fido FireBrick FB2700, Руководство пользователя

Поделиться
Скачать
Fido FireBrick FB2700 Скачать руководство пользователя страница 74

Session Handling

53

Normally the choice is random, but there is an option (hash) which can be set to make the choice determined
based on a has of the source and target IP address. This allows consistent mapping of sessions to the same
server. As the choice depends on the set of servers which have an active profile, if the profiles change, sessions
will get a new consistent mapping based on IP addresses.

7.4. Network Address Translation

Network  Address  Translation  (NAT)  is  the  general  term  used  for  sharing  one  IP  address  between  multiple
devices. It is typically a feature of broadband routers that are designed to operate with one external IP address
and private (RFC1918) addresses on the inside (such as 192.168.x.x).

In additional to NAT, there are several ways in which one can do various types of port mapping and IP mapping
which are described in the general session tracking and firewalling rules above. However, NAT is, itself, a
complex issue and this section describes some of the issues and recommendations for how best to use NAT
on a FireBrick.

7.4.1. When to use NAT

NAT breaks the way Internet Protocol was designed as it stops end to end addressing and routing of packets.
This causes problems with all sorts of protocols that sensibly expect IP to work as designed, and even some that
assume NAT is in use. NAT is not itself a consistent and predictable process, and so it makes it very difficult
for protocol designed.

Because  of  the  many  issues  with  NAT  it  is  strongly  recommended  that  NAT  is  only  ever  used  where  it  is
unavoidable. This is specifically where the availability of public IP addresses is limited.

Unfortunately with legacy IP version 4 addresses the supply of address space is now limited and most ISPs are
only providing a single IPv4 address with an Internet Connection (or charging where more are provided). This
means that it is common to require NAT for IPv4 on a typical Internet connection.

Tip

It is strongly recommended that you make use of PPPoE to connect to such an Internet connection,
thereby affording the FireBrick itself with the single public IPv4 address assigned to the connection.
This allows a number of features to work without use of NAT, including DNS relay, VoIP, and other
internal operations of the FireBrick (e.g. clock setting, s/w updates, etc).

Note

There  is  never  any  excuse  to  use  NAT  with  IPv6.  There  is  a  virtually  unlimited  supply  of  IPv6
address space and you should have no problem obtaining necessary IPv6 address space from your ISP
(assuming they do the current Internet Protocol, which is version 6). Remember, NAT is not a means
of  protection  -  the  FireBrick  has  a  firewall  for  that,  NAT  is  a  workaround  for  IP  address  sharing,
something that is simply not necessary with IPv6 and should not be encouraged.

7.4.2. NAT ALGs

Because of the many problems with NAT and the ways in which many protocols are broken by its use, many
NAT devices (such as broadband routers) will provide an Application Layer Gateway (ALG) as part of the
NAT implementation. This provides special case handling for each higher level protocol or system making use
of NAT that the device knows of, and provides work-arounds for the issues caused by NAT. In some cases this
may simply be customised session timeout, but in some cases the support can be extensive and make major
changes to the payload of packets passed through the device.

ALGs have a number of problems. Obviously they only work at all where the device knows of the protocol in
question, and this is a major draw back for new protocol development. However, they are often imperfect in the
way they work. It is not uncommon for ALGs designed to support VoIP using SIP to be significantly flawed
such that you are better off turning off the ALG and leaving end devices to work around the NAT themselves.

Содержание FireBrick FB2700









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды