• Open the package and remove the protective foam. Remove the protective sleeve from the unit.
• Install the Digital Picture Frame stand as the back of the unit.
• Plug in the AC adapter into power outlet. Plug the other end into the unit.
• After the content is stored on the target flash media; insert the media into the correct slot.
• Turn power to ON position via the ON/OFF switch.
Installing your unit
7
5.6 INCH DIGITAL PICTURE FRAME
Smart
Media
Smart
Media
Smart
Media
Smart
Media
•
Place the stand, as directed in the above
diagram, in the socket until the stand locks in
place
• Connect the supplied power cable
from the photo display to a power
outlet
