Fidelis Fidelis Network CommandPost/K2, Быстрый старт

Страница: 3 / 9

QUICK START GUIDE
Fidelis Network® CommandPost/K2
www.fidelissecurity.com
©Fidelis Cybersecurity
3
CommandPost/K2 Setup Checklist
Check Fidelis Network Sensor – Appliance Requirements
Appropriate rack space, power, and cooling ( Appendix B )
Rack tools, rails, and connectors
Keyboard and video monitor / KVM switch for temporary appliance setup
Power cables — two per appliance, appropriate for power source and region
Ethernet cables (cat5 and optical) for Admin and iLO ports ( Section 3 )
Network switches with enough physical ports ( Section 4 )
Logical network information: IP addresses, hostnames ( Section 5 , Appendix A )
3. CommandPost/K2: Network Port and Cabling
Requirements
Each appliance must be connected to the various networks with appropriate cables and (in some
cases) transceivers. The tables below describe the physical connection and cable type associated
with each port on the appliance.
CommandPost/K2 Appliance
Port Label Physical Connection Type (default) Cable Type (minimum)
Admin GbE RJ45 (copper) Cat 5 patch cable
iLO GbE RJ45 (copper) Cat 5 patch cable
Figure 2: CommandPost/K2 Rear Port Assignments (Rev-I)