QUICK START GUIDE
Fidelis Deception
®
Decoy Server Appliance
www.fidelissecurity.com
©Fidelis Cybersecurity
6
5. Decoy Server — Logical Network Configuration
The Admin and ILO should be configured according to your network configuration. See the table
below as an example. The logical network configuration of the decoys is done as part of the decoys
creation process.
Network Setting
Assignments
Interface
Admin
ILO
Hostname (FQDN)
DecoyServer1.myorg.int
Static IP Address
10.1.2.3
10.2.3.4
Subnet Mask
255.255.255.0
255.255.255.0
Gateway
10.1.2.1
10.2.3.1
Proxy Server
10.5.6.7
DNS Servers
8.8.4.4, 8.8.8.8
NTP Servers
0.pool1.ntp.org
Time Zone
UTC (+0)
6. Appliance Installation
Rack Installation
Install each appliance in an enclosure/location that has necessary power and cooling. Ensure that
the installation environment is within the operating temperature of the appliance.
Refer to
Appendix A
for appliance operating temperature requirements.
Power
Connect power cables to the power supplies in the back of the appliance.
See
Appendix A
for appliance power specifications.
Network Cabling
Using the connectors and cables described in sections 3 and 4, begin to connect the appliances to
the networks. Cable the Sensor appliances to the switches:
1. Connect Admin (eth0) port to the ADMIN switch port.
2. Connect the iLO port to the ADMIN (or ILO) switch port (optional).
7. Deception Appliance Configuration
1. Power on the Appliance(s).
2. Connect to the component’s CLI
Via KVM Console or directly Connect a keyboard
and monitor to the appliance.
