Fidelis Deception CommandPost, Быстрый старт

Страница: 5 / 13

5
.
www.fidelissecurity.com
Copyright © 2022 Fidelis Cybersecurity
®
, Inc. All rights reserved
5. Appliance – Logical Network Configuration
You must assign logical network information to each physical connection. Build a table of the logical
information for each appliance (sample below) that you can reference during configuration. You will
reference this table multiple times during the cluster setup.
Appendix A has a worksheet you can use.
Sample Configuration
Network Setting Assignments
Interface Admin/eth0 iLO / IPMI
Hostname (FQDN) CommandPost-1.organization.net
Static IP Address 10.1.2.3 10.2.3.3
Subnet Mask 255.255.255.0 255.255.255.0
Gateway 10.1.2.1
Proxy Server 10.5.6.7
DNS Servers 8.8.4.4, 8.8.8.8
NTP Servers 0.pool1.ntp.org
Time Zone UTC (+0)
6. Appliance Installation
Rack Installation
Install each appliance in an enclosure/location that has necessary power and cooling. Ensure that the
installation environment is within the operating temperature of the appliance. See
Appendix B for
appliance operating temperature requirements.
Power
Connect power cables to the power supplies in the back of the appliance. See Appendix B for appliance
power requirements.
Network Cabling
Using the connectors and cables described in sections 3 and 4, begin to connect the appliances to the
networks.
Cable the CommandPost appliance(s) to the switches:
1. Connect the Admin (eth0) port to the Admin switch port.
2. Optionally, connect the iLO port to the Admin (or iLO) switch port.