QUICK START GUIDE
Fidelis Network® High Capacity Collector
www.fidelissecurity.com
©Fidelis Cybersecurity
7
Network Cabling
Using the connectors and cables described in sections 3 and 4, begin to connect the appliances to
the networks. Refer to the Collector Network Diagram below.
To cable the Collector Controller 10G appliance(s) to the switches:
1. Connect the Admin (eth0) port to the “ADMIN” switch port.
2. Connect the DB (eth1) port to the “DB” switch port
3. Optionally, connect the iLO port to the ADMIN (or iLO) switch port.
4. Repeat for each Collector Controller.
To cable the Collector XA4 Node appliances to the switches:
1. Connect the Admin (eth0) port to the “ADMIN” switch port.
2. Connect the DB (eth1) port to the “DB” switch port.
3. Connect the SYNC (eth2) port to the “SYNC” switch port.
4. Optionally, connect the iLO port to the ADMIN (or iLO) switch port.
5. Repeat for each Collector XA.
Figure 5: Collector Network Diagram