FIC VT-502, Руководство пользователя, Страница: 2 / 65

Handling Precautions
Warning :
1.
Static electricity may cause damage to the integrated circuits on the
mainboard.
Before handling any mainboard outside of its protective packaging,
ensure that there is no static electric charge in your body
.
2. There is a danger of explosion if the battery is incorrectly replaced.
Replace only with the same or an equivalent type recommended by the
manufacturer.
3. Discard used batteries according to the manufacturer’s instructions.
Observe the following basic precautions when handling the mainboard or
other computer components:

Wear a static wrist strap which fits around your wrist and is connected to a
natural earth ground.

Touch a grounded or anti-static surface or a metal fixture such as a water
pipe.

Avoid contacting the components on add-on cards, boards and modules and
with the “gold finger” connectors plugged into the expansion slot. It is best
to handle system components by their mounting bracket.
The above methods prevent static build-up and cause it to be discharged
properly.
Trademark
All trademarks mentioned in this manual are registered properly of the
respective owners.
Copyright
This manual may not, in whole or in part, be photocopied, reproduced,
transcribed, translated, or transmitted in whatsoever form without the
written consent of the manufacturer, except for copies retained by the
purchaser for personal archival purposes.
Notice