3 - 12
VC15 Mainboard Manual
Onboard Lan Device
This feature allows users to enable or disable the onboard Lan device.
The options are: Enabled, Disabled.
Onboard Lan Boot ROM
This feature allows users to enable or disable the onboard Lan boot ROM
to boot system.
The options are: Enabled, Disabled.
POWER ON Function
Allows you to set the method for powering-on the system. The default
option of
BUTTON ONLY
allows system power-on using the standard
system case mounted ON/OFF switch. The options are: BUTTON ONLY,
Any KEY, Keyboard 98.
Onboard Serial Port 1/2
If the serial port 1/2 uses the onboard I/O controller, you can modify your
serial port parameters. If an I/O card needs to be installed, COM3 and
COM4 may be needed. The options are: Disabled, 3F8/IRQ4, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3, Auto.
UART Mode Select
Allows you to select the IR modes if the serial port 2 is used as an IR port.
Set at Standard, if you use COM2 as the serial port as the serial port,
instead as an IR port. The options are: Normal, IrDA, ASKIR.
UR2 Duplex Mode
Allows you to select the IR modes.
The options are: Full, Half.
TxD , RxD Polarity Active
This feature is available only if the item, UART 2 Mode, is set at ASKIR or
HPSIR. The feature allows you to select the active signals of the reception
end and the transmission end. This is for technician use only.
The options are: Hi, Hi; Hi, Lo; Lo, Hi; Lo, Lo.
Onboard FDC Controller
When enabled, the floppy diskette drive (FDD) controller is activated.
The options are: Enabled, Disabled.
Содержание 1stMainboard VC15
Страница 1: ...VC15 MAINBOARD MANUAL DOC No M01807 Rev A0 Date 10 2001 Part No 25 11632 00...
Страница 12: ...2 2 VC15 Mainboard Manual Mainboard Layout Quick Reference from Page 2 2 to 2 4...
Страница 13: ...2 3 Installation Procedures 1 Clear CMOS Clear Password FSB Speed Select 2 Front Panel Block Cable Connection...