•
Once all screws are in position and hand tight, go ahead and tighten them using a wrench.
•
Insert upper leg bolts and tighten
•
Insert Leg Anchors and tighten.
2 Front and Left leg anchor (3) Middle Right anchor (1) Ladder anchor(2)
•
Note:
3 anchors are same, 2 for the front, 1 for the left side of the slide. 2 angled anchors
are for ladder; 1 wavy anchor is for the right side of the slide(middle leg, right side,
looking from the ladder to the tip of the slide.
•
If the deck is not level, slide the feet up and down and drill at the appropriate location
•
Insert water sprayer, silicone washer on top of slide; and hand tighten
