User interface function
Battery installation
Connecting probes
Sonde catcher
1. Speaker: Indicates recelved signal strength; the
higher pitch and volume, the stronger signal.
2. Power LED: Green LED displays power on.
LED blinks if battery is weak.
3. Arc of 12 red LEDS: In normal operation arc
displays received signal strength with 24 levels.
4. During start-up or mode changing LED arc has
alternative meanings, see Button functions.
To change the batteries, turn the user
interface cap (1) off and take the battery
holder (2) Place old cells with new ones.
Observe battery polarity: (-) poles must be
placed against the spring contacts. Insert the
battery holder back into CR tube according
to the arrow symbol (3). Turn the user
interface cap back on the tube (4).
Battery 3 x A/tuA (IEC LR03)
alkaline batteries
To attach a probe: Push the probe connector
(1) in to CR socket (2) until the locking clicks.
To remove a probe: Press the release button
(3) under the rubber to release the locking
and pull the probe out.
When using duct sondes always mount sonde catcher
including sponge on the ducts end.
Fiberpowertech Plutovej 7 8722 Hedensted Denmark phone: +45 75 89 22 99 mail: [email protected] www.fiberpowertech.dk
