Fiberplex TIS-8632, Руководство пользователя

Страница: 6 / 16

Page 4
Front Indicators/Connections
Figure 1 TIS ‐ 8632 Front Face
Cable Port LED, Upper Left – This LED, for each position, indicates status as per the following table;
Cable Port LED (Upper Left)
Status Description
On Link is OK
Off No link present
Blinking Data is being received or transmitted
Ethernet Cable Port (x4) – These jacks are Unshielded Twisted Pair RJ ‐ 45 cable connection points for
Cat5 capability.
Cable Port LED, Upper Right – This LED, for each position, indicates status as per the following table;
Cable Port LED (Upper Right)
Status Description
3 Blinks Repeating 1000M Speed
2 Blinks Repeating 100M Speed
1 Blink Repeating 10M Speed
SFP Slot (x2) – This is a standard MSA ‐ compliant SFP module slot. (See section ‘Inserting and Removing
SFP Modules’) These ports operate only at 1000 Base ‐ X rates. Do not connect both SFP ports of one unit to
both SFP ports of a second unit, this will cause a switching loop and the units will not operate properly.
SFP Slot LED, Lower Left – This LED, for each position, indicates status as per the following table;
SFP Slot LED (Lower Left)
Status Description
ON Fiber link is OK
OFF Fiber link is failed
Blinking Activity
SFP Slot LED, Lower Right – This LED, for each position, indicates status as per the following table;
SFP Slot LED (Lower Right)
Status Description
ON Optical signal detected
OFF No laser input
1
2
3
4
5
6