FiberHome HG6543C, Руководство по эксплуатации продукта

Страница: 83 / 104

3 Web Configuration Guide
2. Configure relevant parameters according to the requirement. For details of the
parameters, see Table 3-25.
3. Click Apply to save and apply the configuration.
Table 3-25 Parameters for NAT Configuration
Item
Description
WAN The WAN connection bound with the NAT rule.
Description
The NAT rule name.
Rule Type
Select the NAT conversion mode. It is advisable to select One-to-One or
Many-to-One .
Local Start IP
The starting IP address of the intranet.
Local End IP
The ending IP address of the intranet.
Public Start IP
The starting IP address of the public network.
Public End IP
The ending IP address of the public network.
3.5.5 3.5.5 UPnP
Universal Plug and Play (UPnP) supports the plug and play function and the
automatic discovery function for multiple network devices. When the UPnP is
enabled, the devices supporting the UPnP can be added into the network
dynamically. In this way, an external computer can access the resource on an
internal computer when necessary. For example, when some application software is
running on a PC, port mapping table entries will be generated on the ONT
automatically based on the UPnP protocol to speed up the operation.
1. Select Application in the navigation bar and select UPNP → UPNP in the left
link bar to open the UPnP configuration page, as shown in Figure 3-43.
Figure 3-43 UPnP
2. Select to Enable or Disable the UPnP function as required.
3. Click Apply to save and apply the configuration.
Version: A 71