3 Web Configuration Guide
Figure 3-59
NTP Time Calibration
2.
Configure parameters relevant to the NTP time calibration. For details of the
parameters, see Table 3-29.
3.
Click
Check Time
to save and apply the configuration.
Table 3-29
Parameters for NTP Time Calibration
Item
Description
Enable NTP
Check Time
Select whether to enable the NTP time calibration function.
Seconds
Sets the time interval for synchronization with the time server.
First NTP Server
Enter the IP address of the active NTP server.
Second NTP
Server
Enter the IP address of the standby NTP server.
Time Zone
Select the time zone according to the location of the device.
Current Time
When NTP Check Time is enabled, time will be calibrated according to the
location of the device, and the local time will be displayed.
When NTP Check Time is disabled, the system initial time (1970-01-01) or
the previous calibrated time will be displayed.
Binding WAN
Connections
Select the WAN connection type for time calibration.
3.6.3
Log Management
The log files record key operations and actions on the ONT. Users can view the
information saved in the log as needed.
Version: A
85
