2 Product Introduction
Interface and
Button
Description
Function
Telephone interface
Connects to the subscriber's telephone.
LAN1 to LAN4
Ethernet port
Connects to the computer, IP router or IP set top
box.
USB Host interface
Connects to the USB interface storage device.
Power
Power interface
Connects to the power adapter.
On/Off
Power switch
Turns on or off the power for the equipment.
Reset
Reboot button
Press down the button for no more than five
seconds to reboot the equipment; press it down
for a longer time to restore the factory settings
and reboot the equipment.
WLAN
WLAN function
button
Enables / disables the WLAN function.
WPS
WPS function button
Enables / disables WLAN data encryption.
PON
Fiber interface
Connects with the optical fiber for uplink access.
Indicator LEDs
Indicator
LED
Meaning
Color
Status
Status Description
Power
Power status
indicator LED
Green
ON
The device is powered on.
OFF
The device is not powered on.
PON
Register status
indicator LED
Green
ON
The ONT has been activated.
Blinking
The ONT is being activated.
OFF
Activation of the ONT is not yet
started.
LOS
Optical signal
status indicator
LED
Red
Blinking
The device has not received the
optical signal.
OFF
The device has received the optical
signal.
Internet
Broadband
status indicator
LED
Green
ON
Connection to the broadband
network is normal.
Version: A
9
Phone
Table 2-3
Interfaces and Buttons on the HG6143D
USB
Indicator LEDs of the HG6143D are located on the front panel of the equipment.
Table 2-4 describes the indicator LEDs.
Table 2-4
Indicator LEDs on the HG6143D