FiberHome AN5516-04, Быстрое руководство по установке

Страница: 22 / 36

11.3
Connecting the Subrack Protection Eart
Uninsulated ring
tongue crimped
terminal
Uninsulated ring
tongue crimped
terminal
Subrack protection earth ground cable
Cling the uninsulated ring tongue
crimped terminal on one end of the
protection earth ground cable to the
earth ground hole on the subrack and
secure it with a panel screw with a flat
washer from the accessories.
Install the floating nut and cling the
uninsulated ring tongue crimped
terminal on the other end of the cable to
the determined mounting hole.
(Installers may select a convenient
installation hole on the vertical mounting
flange to account for distance and
position.) Secure the terminal by
tightening the panel screw with a flat
1
2
11.4
Connecting the Subrack Power Cable
Caution
tightening the panel screw with a flat
washer from the accessories.
 Completely insert the cord end terminals
connection, the metal part exposed shou
The length of exposed insulation coverin
should be equal whenever possible.
 Do not press the insulation covering of th
electrical connection.
18
Caution
e ec ca co ec o
 Make sure the side with larger area of the
 The power cables and the signal cables s
 After you have completed connection of
information to both ends of each cable, 1
th Ground Cable
Cross
screwdriver
Marker pen
Flat
screwdriver
M6
Panel screw
1
2
into the terminal blocks on the PDP. To ensure good
uld not exceed one sixth of the overall metal length.
g or metal part of terminals in the same row or batch
he cord end terminals, which may result in poor
8
e cord end terminal contacts with the terminal block.
should be bound separately.
the power cables, attach a label indicating the cable
cm to 2 cm away from the connector on each end.