13. Hardware Installation
Step 1 : Connect The
PON
interface and the optical interface on the wall with the optical
fiber
(11)
Step 2 : Connect The
LAN
interface and the network interface of a computer through an ethernet cable.
(6)
Step 3 : Connect The
Phone
interface with a telephone through a phone cable.
Step 4 : Connect The
Power
interface with the power adapter, and the plug to the power socket.
Step 5 : Press the
ON/OFF
button to turn on the device
(8)
The following table describes the interface of the device:
No.
Port/Button
Description
1
Button 5G
WPS
WPS2
The Wps1 buttom to enable or disable the 5 Wi-Fi Protected Setup
function
2
Button 5G
wireless
WLAN2
The WLAN1 button to enable or disable the 5 WLAN function.
3
Button 2G
WPS
WPS1
The Wps1 buttom to enable or disable the 2.4 Wi-Fi Protected Setup
funtion
4
Button 2G
wireless
WLAN1
The WLAN1 button to enable or disable the 2.4 WLAN function.
5
Port Tel
Phone1,Phone2 Indicates VoIP telephone ports (RJ-11), used to connecting to the ports
on telephone sets
6
Port Network
LAN1 - LAN4
The USB interface connecting to the USB storage device
7
Port USB
USB1 , USB2
Interface connecting to the power adapter.
8
Button Power
ON/OFF
The Power interface connecting to the DC Power adapter or the storage
battery.
9
Port Power
Power
Press the button for a short time to reset the device; press the button for
a long time (longer than 10s) to restore the device to the default settings
and reset the device.
10
Button Reset
Reset
The fiber interface connecting to the optical fiber.
11
Port Optical
PON
The USB interface connecting to the USB storage device
