AN5506-04-A GPON Optical Network Unit User Manual
3-4
Version: A
Insert one end of the optical jumper into the AN5506-04-A PON
interface slightly.
Connect the other end of the optical jumper with the optical splitter.
The connection of optical fibers is finished.
Caution 1: If the optical fiber jumpers are not used, make sure
optical fiber jumpers and the AN5506-04-A optical interfaces
are covered to avoid dust contamination and water
penetration, which lead to the uselessness of optical fiber
jumpers and the AN5506-04-A optical interfaces.
Caution 2: Connect optical fibers at last if possible. Lay
optical fibers at the position without extrusion.
3.3.3
Connection of Power Cable
The AN5506-04-A adopts the power adapter with two pins, the
connection steps are as follows.
Take out the accompanied DC power adapter with two pins.
Connect one end of the adapter to the power interface of the
AN5506-04-A.
Connect the other end to AC socket.
The connection of power cable is finished.
