©
Copyright 2018, Fiber Mountain, Inc. All Rights Reserved
13
Sensus FPA Installation Manual
150-00006.01.04
•
If this equipment has two power sources be sure to disconnect all power sources before
working on this equipment.
•
If this equipment does not have a main power switch, the power cord connector serves as
the disconnect device.
•
Always pull on the plug or the connector to disconnect a cable. Never pull on the cable
itself.
•
Unplug this equipment when unused for long periods of time.
Circuit Overload
Know the effects of circuit overloading before connecting this equipment to the power supply.
CAUTION:
Consider the connection of this equipment to the supply circuit and the effect that overloading of circuits
might have on overcurrent protection and supply wiring. Refer to the information on the equipment-rating
label when addressing this concern.
General Servicing Precautions
WARNING:
Avoid electric shock! Opening or removing this equipment's cover may expose you to dangerous
voltages. Be aware of the following general precautions and guidelines:
•
Servicing
–
Disconnect all supplies before servicing. Refer all servicing to qualified service
personnel. Servicing is required when this equipment has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled or objects have fallen
into this equipment, this equipment has been exposed to rain or moisture, does not operate
normally, or has been dropped.
•
Wrist watch and Jewelry -
For personal safety and to avoid damage of this equipment
during service and repair, do not wear electrically conducting objects such as a wristwatch
or jewelry.
•
Lightning -
Do not work on this equipment, or connect or disconnect cables, during
periods of lightning.
•
Labels -
Do not remove any warning labels. Replace damaged or illegible warning labels
with new ones.
•
Covers -
Do not open the cover of this equipment and attempt service unless instructed to
do so in the instructions. Refer all servicing to qualified service personnel only.
•
Moisture -
Do not allow moisture to enter this equipment.
•
Cleaning -
Use a damp cloth for cleaning.