FIBER FOX Mini 12R+, Руководство пользователя

Страница: 37 / 48

35
8.5 Monitor Position
The direction of the splicer display before shipping from the factory is set to
“Front”, but users can change it to “Rear”. When [Monitor position] is changed, the
direction of the arrow keys is reversed.
Changing monitor position
① Select “Monitor Position” in “System setting” menu.
② Select the desired monitor position (front/ rear).
8.6 Power Save Option
This function is important for power conservation. If the power saving function is
not set during battery pack use, the number of splice cycles will be reduced.
(1) Insert a power unit and turn on the splicer.
(2) Select “Power Save Option” in “System Setting” menu.
(3) Change values of “Monitor Shut Down” and “Splicer Shut Down”.
parameter description
Monitor Shut Down
To avoid power loss when battery is used, setting this function turns off
the power supply to the LCD monitor if the splicer does not operate after
a certain period of time. When the power supply for monitor turns off, the
LED near the power key blinks. Press any key to turn on the LCD monitor.
Note :
* You can also rapidly change the monitor position in the main menu by pressing the
arrow keys of left and right.