FibberservCL FSAC201, Руководство пользователя, Страница: 27 / 60

!
Tip: for this step, you could also press the “Z” button of the gateway for two seconds until the LED
indicator turns solid blue.
Step 3: Use a pin key tool to press the RC204 reset button. Then the device will join the ZigBee
network of the gateway.
Step 4: If the remote control is paired into the gateway successfully, the main LED indicator will
flash green three times. After pairing, please press any button to check if the main LED indicator
flashes red once indicating that it is paired into the system.
Tip: If the main LED indicator flashes red three times means it hasn’t added into the gateway. You
will need to repeat from step 2.
Step 5: Pair with 1-4 CCT Tunable LED bulb LED622
Note: please make sure the LED622 is also added into the network of the gateway and can be
controlled by the mobile app before proceed.
(1) Make sure the LED bulbs that want to bind with this remote control are powered on.
(2) Go to the “Automation” section, tap “Edit” (Android phone) or swipe from left to right (iPhone).
Tap “Identify”. The LED bulb will be flashing during the “Identify” process.
!
(3) Place the remote control near to the LED bulb, then press and hold one of the individual ON/
OFF for three seconds until the main LED indicator flashes green once.