19
Appendix C: Starting recovery HCL
Make sure
the device is
turned ON
.
Press and hold
two buttons at the same time:
Power
and
Recovery
.
Release
the buttons when the LED diodes start
moving in a sequence
.
Entering into Recovery mode is signalled by the LED diodes moving to the middle and back.
IMPORTANT
:
Don’t hold the Recovery button for too long!
If you hold the Recovery button for 10
se
conds the Home Center IP will be set to 192.168.81.1 and you’ll need to adjust the network settings
on your computer in order to access the device.
Type in the
IP address
of Home Center Lite in your web browser or use Fibaro Finder.
Recovery Mode screen
will be displayed:
