FIBARO HC3L-001, Руководство по эксплуатации

Страница: 38 / 63

38
Z-Wave
21: Z-WAVE
21.1: SETTINGS
• Reconfigure all devices,
• Reconfigure mesh network (You can choose if you want to configure
entire Z-Wave network or single devices),
• Broadcast “Node Information” frame,
• Add secondary controller,
• Transfer controller,
• Reset energy metering,
• Reset Z-Wave,
• Enable devices polling,
• Poll unavailable devices,
• Mark nodes as unavailable,
• Set devices polling time interval,
• See number of devices added to your gateway.
22: AUTOMATION
22.1: SCENES
Scenes allow automating your system to provide the real Smart Home
experience. They can integrate multiple devices included in your system
and may be activated by weather conditions, a series of intuitive timers or
various sensor/module states.
There are three types of scenes to create in the interface:
• Block Scenes are easy to build. Using number of available
customizable blocks complex scenes can be visually created. It is
not possible to implement all functionalities of the System with Block
Scenes, but are the best way for a basic user to enhance home
automation.
• Lua Scenes are most advanced, but allow user to fully utilize all
System capabilities. Such scenes are based on the Lua programming
language and require basic programming skills.
• The scenarios are very easy to build. They have almost ready-made
solutions for autoamticiation.