6
Follow instructions of the device.
There are a few adding options you can choose in the
Add Device
window:
Options you can choose:
Device is located far from the gateway (disable it for more security),
NWI – Network-Wide inclusion (useful for devices that are not near the gateway, but withing networks
range),
Add in security mode if device supports it.
You can also set Learning mode duration – how much time you will have to perform the adding procedure
on the device.
Removing Z-Wave devices (If not added)
1
Open the Con guration Interface.
2
Go to
> Devices.
3
Click on the Z-Wave tab.
4
Click
.
5
Follow instructions of the device.
Removing Z-Wave devices (If added)
1
Open the Con guration Interface.
2
Go to
> Devices.
3
Click
next to the device you want to remove from the system.
4
Set learning mode duration and click
Continue.
5
Follow instructions of the device.
Force removing Z-Wave devices
1
Open the Con guration Interface.
2
Go to
> Devices.
3
Click
next to the device you want to remove from the system.
4
Set learning mode duration and click
Continue.
5
Click
which appeared in place of
.
6
Con rm the action.
7
The gateway will try to communicate with the device. If the device responds, the process will by
canceled, otherwise it will be removed from the system.