manualshive.com logo in svg

FIBARO FGWPB-111, Руководство по эксплуатации, Страница: 13 / 22

Поделиться
Скачать
FIBARO FGWPB-111 Скачать руководство пользователя страница 13

13

Z-WAvE SPECIFICATIOn

Notification Command Class: 

The device uses notification Command Class to report different events 

to the controller (“Lifeline” group).

notification 

Type

Event

Event Parameters

Power  

Management  

[0x08]

Over-load detected [0x08]
Over-current detected [0x06]

System 

[0x09]

System hardware Failure 

[0x03] 

Device overheat 

[0x01]

Protection CC: 

Protection Command Class allows to prevent local or remote control of 

the device.

Type of protection State

Description

Local

0

Unprotected

 - The device is not pro-

tected, and may be operated normally 

via the user interface.

Local

2

No operation possible

 – button can 

not change relay state, any other func-

tionality is available (menu)

RF (remote)

0

Unprotected

 - The device accept and 

respond to all RF Commands.

RF (remote)

1

No RF control

 – command class basic 

and switch binary are rejected, every 

other command class will be handled

Meter Command Class: 

Meter Type

Scale

Rate Type

Precision

Size

Electric 

[0x01]

Electric_kWh  

[0x00]

Import  

[0x01]

2

4

Electric 

[0x01]

Electric_W  

[0x02]

Import  

[0x01]

1

2

Содержание FGWPB-111























Отзывы:

Нет отзывов