FIBARO FG-WDSEU221-AS-8001, Руководство по эксплуатации, Страница: 14 / 40

14
operatIng the DevIce
7: Operating the device
7.1: Controls
1
2
3
1. First button,
2. Second button,
3. LED ring.
7.2: Single/Double Switch operating mode
The device can work as single or double switch:
• Double Switch mode (default) – the device can control two sepa-
rate loads, but they can be up to 13A per channel and 16A total.
• Single Switch mode – the device can control only one load, but it
can be rated up to 16A.
i
Changing operating mode must performed before
adding it to the Z-Wave network!
To change operating mode before adding to Z-Wave network:
1. Quickly, three times click, then press and hold one of the buttons
to enter the menu.
2. Release button when the device glows white.
3. Quickly click the button to confirm.
4. The device will change and signal the new operating mode:
• 1 white blink – Single Switch mode,
• 2 white blinks – Double Switch mode.
To check operating mode after adding to Z-Wave network:
1. Quickly, three times click, then press and hold one of the buttons
to enter the menu.
2. Release button when the device glows white.
3. Quickly click the button to confirm.