After the first phone data transmission, the procedure for transmitting and updating the phonebook (if supported)
starts as soon as a Bluetooth® connection is established between mobile phone and system.
This downloaded phonebook cannot be edited on the multimedia system. It can only be edited on the mobile
phone. When the device is deleted from the paired device list or the restore default settings option is activated, the
phonebook will be automatically deleted from the multimedia system. The changes are transferred and updated to
the multimedia system on the next phone connection.
Whenever a mobile phone is connected to the system, a maximum of 3000 contacts can be
downloaded and updated for each phone. Depending on the number of items downloaded from
the phonebook, a slight delay can occur before the last downloaded entry can be used. Up to then the phonebook
downloaded previously (if present) will be available.
Only the phonebook of the mobile phone currently connected to the system can be accessed.
Connecting To a Particular Mobile Phone Or Audio Device After Pairing
Multimedia System will automatically connect to the highest priority paired phone and/or Audio Device within
range. If you need to choose a particular phone or Audio Device follow these steps:
➢
Ensure that the Bluetooth® function is in ON status on the mobile phone
➢
Press the PHONE button.
➢
Press
to enter to the list of paired devices.
➢
If the mobile phone is in use as a Media source, press
button on the touchscreen.
➢
If the mobile phone is in use only for Phone function, press
button on the touchscreen.
➢
If the mobile phone is in use as both Media source and Phone, press
“
Connect Both
”
button on the
touchscreen.
➢
A pop-up will appear, and multimedia system connects to the mobile phone automatically.
Disconnecting A Phone Or Audio Device
➢
Press the PHONE button on the front panel.
➢
Press the
button on the display.
➢
Select the specific device from the "Paired Devices List
”.
➢
Press
button to disconnect as
“Media
source”
and/or press
button to disconnect as
“Phone
source”.
