Fiat Capron A361 Скачать руководство пользователя

Страница: 28 / 160

Capron - 04-17 - CAP-0017-01

Before the journey

4.9

Bonnet (model I)

Opening:

Pull the release lever (Fig. 5,1) situated on the left-hand side of the vehicle
on the dashboard. The bonnet (Fig. 6,1) opens.

Move the bonnet forwards and downwards in an arch.

Closing:

Move the bonnet upwards in an arch.

Press down the centre of the bonnet until the catch lock engages audibly.

Check whether the bonnet is locked correctly. In order to carry this out, pull
on the bonnet.

4.10

Filling in windscreen washer fluid (model I)

Unlock and open the bonnet.

Open the lid (Fig. 7,1) on the filler neck of the washer fluid container.

Carefully fill in windscreen washer fluid.

Close the lid on the filler neck of the washer fluid container.

Close the bonnet.

When the bonnet is open, there is a risk of injury in the engine compart-
ment.

Even if the engine was switched off some time ago, it might still be hot.
Danger of burns!

Do not work in the engine compartment while the engine is running.

The bonnet must be kept firmly closed and locked during the journey.
After closing, check whether the lock has engaged. In order to carry this
out, pull on the bonnet.

Fig. 5

Release lever (bonnet)

Fig. 6

Bonnet

Fig. 7

Filler neck (windscreen washer

fluid)

Содержание Capron A361

































































































































































Результаты поиска

Содержание Capron A361

Отзывы:

Похожие инструкции для Capron A361

Бренды по названию

Популярные бренды

Fiat Capron A361, Руководство пользователя

Результаты поиска

Содержание Capron A361

Отзывы:

Похожие инструкции для Capron A361

Бренды по названию

Популярные бренды