Fiat 500X2017, Руководство пользователя

Страница: 141 / 228

CARGO AREA FEATURES
Cargo Load Floor — If Equipped
The vehicle is equipped with a load floor that can be adjusted as needed
.
Position 1 (Floor Flush):
This position allows you to make the load floor flat for ease of loading/unloading objects
from the cargo area
. This position also makes it possible to use the space below as an-
other compartment for storing fragile or smaller objects
.
Position 2 (Elevated Position):
When the rear seatbacks and front passenger seat is folded flat, it will allow for loading
objects of long dimensions
.
It is recommended to use this position only during the actual
transporting of the objects, then bring the load floor in position 1
.
NOTE:
With a full size spare, the floor will be at the elevated position .
Access To The Loading Floor
To access the double load compartment, proceed as follows:
1 . Lift up on the Load Floor Handle .
2
.
Place the desired objects inside the compartment
.
3 . Reposition the load floor .
CAUTION!
The load floor must be arranged in a central position with respect to cargo area .
Displacement Load Floor
To position the load from the lower to the upper position, proceed as follows:
1
.
Grasp the load floor handle and lift up the load floor
.
2
.
Correctly place the load floor on the side panel guides and on the rear cross mem-
ber
.
Access To Tire Service Kit Or Spare Tire
To access the Tire Service Kit or spare tire and container carrier, proceed as follows:
1 . Grasp the load floor handle and remove the floor .
2 . Pull the tab and lift up on the carpet .
UTILITY
139