Fiat 500L 2020, Руководство пользователя

Страница: 131 / 284

STARTING AND OPERATING 129
NOTE:
In order to ensure proper operation, the Speed
Control system has been designed to shut down
if multiple Speed Control functions are operated
at the same time. If this occurs, the Speed
Control system can be reactivated by pushing the
Speed Control on/off button and resetting the
desired vehicle set speed.
To Activate
Push the on/off button to activate the Speed
Control. The cruise indicator light in the instru -
ment cluster display will illuminate. To turn the
system off, push the on/off button a second
time. The cruise indicator light will turn off. The
system should be turned off when not in use.
To Set A Desired Speed
Turn the Speed Control on. When the vehicle
has reached the desired speed, push the SET
(+) or SET (-) button and release. Release the
accelerator and the vehicle will operate at the
selected speed.
NOTE:
The vehicle should be traveling at a steady speed
and on level ground before setting the speed.
To Vary The Speed Setting
To Increase Speed
When the Speed Control is set, you can increase
speed by pushing the SET (+) button.
The driver’s preferred units can be selected
through the Uconnect settings (if equipped).
Refer to ”Uconnect Settings” in “Multimedia”
for more information. The speed increment is
dependent on the selected speed unit of U.S.
(mph) or Metric (km/h):
U.S. Speed (mph)

Pushing the SET (+) button once will result in a
1 mph increase in set speed. Each subsequent
tap of the button results in an increase of
1 mph.

If the button is continually pushed, the set
speed will continue to increase until the button
is released, then the new set speed will be
established.
Metric Speed (km/h)

Pushing the SET (+) button once will result in a
1 km/h increase in set speed. Each subse -
quent tap of the button results in an increase of
1 km/h.

If the button is continually pushed, the set
speed will continue to increase until the button
is released, then the new set speed will be
established.
To Decrease Speed
When the Speed Control is set, you can
decrease speed by pushing the SET (-) button.
WARNING!
Leaving the Speed Control system on when
not in use is dangerous. You could
accidentally set the system or cause it to go
faster than you want. You could lose control
and have an accident. Always leave the
system off when you are not using it.
5
20_BG_OM_EN_US_t.book Page 129