Fiat 500 ABARTH CABRIO 2017, Руководство пользователя

Страница: 60 / 172

To Decrease Speed
When the Speed Control is set, you can decrease speed by pushing the SET (-)
button.
The driver’s preferred units can be selected through the Uconnect settings if
equipped. Refer to "Uconnect Settings” in “Understanding Your Instrument Panel”
in the Owner’s Manual at www.fiatusa.com/en/owners/manuals for more informa-
tion. The speed decrement shown is dependant on the selected speed unit of
U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (-) button once will result in a 1 mph decrease in set speed.
Each subsequent tap of the button results in a decrease of 1 mph.
• If the button is continually pushed, the set speed will continue to decrease until
the button is released, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET (-) button once will result in a 1 km/h decrease in set speed.
Each subsequent tap of the button results in a decrease of 1 km/h.
• If the button is continually pushed, the set speed will continue to decrease until
the button is released, then the new set speed will be established.
To Accelerate For Passing
Press the accelerator as you would normally. When the pedal is released, the
vehicle will return to the set speed.
Using Speed Control On Hills
The transmission may downshift on hills to maintain the vehicle set speed.
NOTE:
The Speed Control system maintains speed up and down hills. A slight speed change on
moderate hills is normal.
On steep hills, a greater speed loss or gain may occur, it may be preferable to drive
without Speed Control.
OPERATING YOUR VEHICLE
58