Fiat 2016 500X, Руководство пользователя

Страница: 64 / 204

PARKSENSE REAR PARK ASSIST — IF EQUIPPED
The ParkSense Rear Park Assist system provides visual and audible indications of the dis-
tance between the rear fascia and a detected obstacle when backing up, e
. g . during a
parking maneuver .
ParkSense will retain the last system state (enabled or disabled) from the last ignition
cycle when the ignition is changed to the MAR/RUN position
.
ParkSense can be active only when the shift lever/gear selector is in REVERSE .
ParkSense Sensors
The four ParkSense sensors, located in the rear fascia/bumper, monitor the area behind
the vehicle that is within the sensors’ field of view
.
The sensors can detect obstacles from
approximately 12 in (30 cm) up to 59 in (150 cm) from the rear fascia/bumper in the
horizontal direction, depending on the location, type and orientation of the obstacle
.
Chime
By shifting the vehicle in REVERSE and in the case of the presence of a rear obstacle, an
acoustic signal that varies with the distance of the obstacle from the bumper is activated
.
The frequency of the acoustic signal:
• Increases with the distance between car and object decreases
.
• Becomes continuous when the distance that separates the car from the obstacle is less
than approximately 12 inches (30 cm), while terminates immediately if the distance to
the obstacle increases
.
• Remains constant if the distance between car and obstacle remains unchanged
.
If this
situation occurs for the side sensors, the signal is stopped after approximately three
seconds to avoid, for example, it activates in case of maneuver along a wall
.
When the system emits a beeping sound, the volume of the Uconnect system, if turned
on, is automatically lowered by ParkSense
.
Detection Distances
If the sensors detect more obstacles, it is taken into account only what is the shorter dis-
tance
.
OPERATING YOUR VEHICLE
62