3. Connect the negative end
(-)
of the jumper cable to the
negative
(-)
post of the booster battery.
4. Connect the opposite end of the negative
(-)
jumper
cable to a good engine ground (exposed metal part of
the discharged vehicle’s engine) away from the battery
and the fuel injection system.
WARNING!
Do not connect the cable to the negative post (-) of the
discharged battery. The resulting electrical spark
could cause the battery to explode and could result in
personal injury.
5. Start the engine in the vehicle that has the booster
battery, let the engine idle a few minutes, and then
start the engine in the vehicle with the discharged
battery. Once the engine is started, remove the jumper
cables in the reverse sequence:
6. Disconnect the negative
(-)
jumper cable from the
engine ground
(-)
of the vehicle with the discharged
battery.
7. Disconnect the negative end
(-)
of the jumper cable
from the negative
(-)
post of the booster battery.
8. Disconnect the opposite end of the positive
(+)
jumper
cable from the positive
(+)
post of the booster battery.
9. Disconnect the positive
(+)
end of the jumper cable
from the positive
(+)
post of the discharged vehicle.
If frequent jump-starting is required to start your vehicle,
you should have the battery and charging system in-
spected at your authorized studio.
6
WHAT TO DO IN EMERGENCIES
317
Содержание 2013 500 ABARTH
