FIAM. PLANA PL180, Информация о продукте

Страница: 16 / 24

• Intended Use
Once removed from its original packaging, the PLANA cupboard must be placed on a perfectly flat surface and which is firm
enough to support the weight of the cupboard.
All the PLANA cupboard's supporting bases must be resting firmly on the surfaces on which it is placed; otherwise, the PLANA
cupboardmay lose stability, making it hazardously unstable. Weights, objects and loads must be evenly distributed across the
surfaces of the PLANA cupboard and well balanced in order to ensure stability and safety. Unevenly placed or unbalanced weights,
objects and loads on the surfaces of the PLANA cupboard may reduce its stability and thus its safety.
Sharp items or anything which may damage the glass (such as chemical products containing hydrofluoric acid) should not be
placed on the surface of the PLANA cupboard. If objects of this kind are placed on the surface of the PLANA cupboard in spite of
this warning, you are urged to take adequate precautions to prevent damage to the float glass.
When placing sharp objects on the surface of the PLANA cupboard, a mat of insulating material (such as rubber, cork, plastic or
leather) thick enough to dampen any impacts should be placed between the float glass surface and the sharp objects. Never place
items which may damage the float glass (such as chemical products containing hydrofluoric acid) on the surface.
• Warnings - Incorrect use and Non-recommended use
Below, we provide a series of warnings and examples of incorrect uses or procedures which reduce the safety of the PLANA
cupboard.
The series of warnings and incorrect uses or procedures provided below is purely guideline and does not cover all the possible
circumstances for incorrect or non-recommended uses of the PLANA cupboard, which must be evaluated on each occasion.
Do not sit, lean or stand upon the float glass surface of the PLANA cupboard.
Do not use the float glass surface of the PLANA cupboard as a chopping surface.
Do not strike the PLANA cupboard with hammers or pointed items which may crack or shatter the glass.
Do not use powder detergents or detergents containing abrasives for cleaning the PLANA cupboard, since they may damage the
float glass.
Do not use the PLANA cupboard for DIY work or for mechanical, electrical or electronic repairs.
In normal conditions of use, do not tilt the product by more than 10°. Any higher angles might reduce the stability of the PLANA
cupboard.
Never place items at temperatures below -30°C (such as items just taken out of the freezer), or with temperatures above +30°C
(such as foods just removed from the oven) on the PLANA cupboard; exposing the surface to stresses of this kind may damage
the glass, reducing its strength and thus its safety level.
Never expose the PLANA cupboard to intense heat sources (such as stoves or ovens); exposing the table to stresses of this kind
may damage the float glass, reducing its strength and thus its safety level. Do not expose the PLANA Table to temperatures below
-10°C or weather; exposure of this kind may damage the glass, reducing its strength and thus its safety level. The PLANA
cupboard should be placed well away from items such as coat racks or ornaments which may accidentally fall onto its surface.
• Moving the cupboard
To ensure that the PLANA cupboard is moved in the conditions of the utmost safety, we urge you to comply with the instructions
provided below:
1) The cupboardmust always be handled by at least two people, wearing gloves which assure a good grip on the float glass.
2) If the showcase has an illumination kit disconnect the electric plug from the power socket.
Safety instructions
2
16/24
DO NOT CONNECT THE ELECTRIC JACK IN THE REAR OF THE SHOWCASE BASE TO ANY FORM OF ELECTRIC
CURRENT BUT RATHER ONLY TO THE ILLUMINATION KIT SOLD SEPARATELY BY FIAM ITALIA.