PALLADIO UNO FIX Wired showcase
Art. 2150/S - 2150/N - 2150/B - 2150/XL
1
2
Product description and intended use
• Product description and composition
The PALLADIO UNO FIX Wired showcase - Art. Code 2150/S - 2150/N - 2150/B - 2150/XL is a Wired showcase intended as
an item of indoor furniture. It is manufactured from curved float plate glass. The PALLADIO UNO FIX Wired showcase was
produced at the FIAM ITALIA s.r.l. factory at Via Ancona 1/B, 61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax:
+39.0721.202432 - www.fiamitalia.it
• Intended use
The article known as PALLADIO UNO FIX is designed and built to serve as a Wired showcase for indoor use and must therefore
be used only for this purpose and no other.
For more information about the product's intended use please refer to section “
2) SAFETY INSTRUCTIONS
”.
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the
telephone numbers stated in this document.
• Transporting and storing the PALLADIO UNO FIX Wired showcase in the original
packaging
The PALLADIO UNO FIX Wired showcase , in its original packaging, must be transported taking the greatest care to prevent
knocks and shaking. It must be stored indoors in a dry place.
Place the PALLADIO UNO FIX Wired showcase in the original packaging, in the horizontal position. The arrows on the label on the
packaging must be vertical and pointing upward.
Never place weights or loads in excess of 130 Kg on the original packaging, since exceeding this weight may cause the breakage
of the article.
The PALLADIO UNO FIX Wired showcase in the original packaging weighs about 120 kg.
It must therefore be placed on surfaces capable of supporting its weight.
• Removing the packaging - assembly
To remove the original packaging of the PALLADIO UNO FIX Wired showcase , proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may
damage the PALLADIO UNO FIX Wired showcase .
c) Remove the PALLADIO UNO FIX Wired showcase from its packaging. At least two people are required for this operation. Wear
gloves which assure a good grip on the float glass.
d) Fit the shelves following the instructions provided.
Safety instructions
EN
6/16
