FIAM. LLT OFX Executive LLT/E/18, Информация о продукте

Страница: 7 / 16

LLT OFX Executive Desk
1
2
Product description and intended use
• Product description and composition
The LLT OFX Executive Desk is a Desk intended as an item of indoor furniture. It is manufactured from curved float plate glass.
The LLT OFX Executive Desk was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia (PU), Italy - Tel:
+39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it
• Intended use
The article known as LLT OFX Executive is designed and built to serve as a Desk for indoor use and must therefore be used only
for this purpose and no other.
For more information about the product's intended use please refer to section “
2) SAFETY INSTRUCTIONS ”.
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the
telephone numbers stated in this document.
• Transporting and storing the LLT OFX Executive Desk in the original packaging
The LLT OFX Executive Desk, in its original packaging, must be transported taking the greatest care to prevent knocks and
shaking. It must be stored indoors in a dry place.
Place the LLT OFX Executive Desk in the original packaging, in the horizontal position. The arrows on the label on the packaging
must be vertical and pointing upward.
Never place weights or loads in excess of 150 Kg on the original packaging, since exceeding this weight may cause the breakage
of the article.
The LLT OFX Executive Desk in the original packaging weighs about 193 kg.
It must therefore be placed on surfaces capable of supporting its weight.
• Removing the packaging - assembly
To remove the original packaging of the LLT OFX Executive Desk, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may
damage the LLT OFX Executive Desk.
c) Remove the frame of the LLT OFX Executive Desk from its packaging. At least two people are required for this operation. Wear
gloves which assure a good grip on the float glass.
d) Remove the top of the LLT OFX Executive Desk from its packaging and place it on the frame. At least four people are required
for this operation. Wear gloves which assure a good grip on the float glass.
Safety instructions
EN
Art. LLT/E/18 - LLT/E/26