FIAM. GRILLO 1800, Информация о продукте

Страница: 6 / 20

GRILLO Low Table
Art. 1800
Product description and intended use
1
EN
1.1) Product description and composition
The GRILLO Low Table - Art. Code 1800 is a Low Table intended as an item of indoor furniture. It is manufactured from curved,
annealed float plate glass. The GRILLO Low Table was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia
(PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it.
1.2) Intended use
The article known as GRILLO is designed and built to serve as an indoor Low Table and must therefore be used only for this
purpose and no other.
For more information about the product's intended use please refer to section
“2) SAFETY INSTRUCTIONS” .
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below.
If in doubt or if you require further information concerning the use of the product, please contact us on the telephone numbers
stated in this document.
2.1) Transporting and storing the GRILLO Low Table in the original packaging
The GRILLO Low Table, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking. It
must be stored indoors in a dry place.
Place GRILLO Low Table in the original packaging, in the horizontal position. The arrows on the label on the packaging must be
vertical and pointing upward.
Never place weights or loads in excess of 30 Kg on the original packaging, since exceeding this weight may cause the breakage
of the article.
TheGRILLO Low Table in the original packaging weighs about 20 kg.
It must therefore be placed on surfaces capable of supporting its weight.
2.2) Removing the packaging - assembly
To remove the original packaging of the GRILLO Low Table , proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not strike the GRILLO Low Table with hammers or pointed
items which may crack or shatter the glass .
c) Remove the GRILLO Low Table from its packaging. Wear gloves which assure a good grip on the float glass.
Safety instructions
2