FIAM. 870, Информация о продукте

Страница: 6 / 16

LET ME SEE Console
Art. 870
1
2
Product description and intended use
• Product description and composition
The LET ME SEE Console - Art. Code 870 is a Console intended as an item of indoor furniture. It is manufactured from curved
float plate glass. The LET ME SEE Console was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia (PU),
Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it
• Intended use
The article known as LET ME SEE is designed and built to serve as a Console for indoor use and must therefore be used only for
this purpose and no other.
For more information about the product's intended use please refer to section “
2) SAFETY INSTRUCTIONS ”.
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the
telephone numbers stated in this document.
• Transporting and storing the LET ME SEE Console in the original packaging
The LET ME SEE Console, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking.
It must be stored indoors in a dry place.
Place the LET ME SEE Console in the original packaging, in the horizontal position. The arrows on the label on the packaging must
be vertical and pointing upward.
Never place weights or loads in excess of 100 Kg on the original packaging, since exceeding this weight may cause the breakage
of the article.
The LET ME SEE Console in the original packaging weighs about 80 kg.
It must therefore be placed on surfaces capable of supporting its weight.
• Removing the packaging - assembly
To remove the original packaging of the LET ME SEE Console, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may
damage the LET ME SEE Console.
c) Remove the LET ME SEE Console from its packaging. At least two people are required for this operation. Wear gloves which
assure a good grip on the float glass.
d) Fit the two parts of the Console together and secure the assembled product to the wall following the instructions provided below.
Safety instructions
EN
6/16