fiac AIRBLOK 40, Руководство по эксплуатации и обслуживанию, Страница: 31 / 68

31/50
GB
COMPRESSOR MAINTENANCE 6
6 Compressor maintenance
In order to use the compressor in complete safety read the safety standards given
in section 1.3. before reading this section.
6.1 Instructions relative to inspections and maintenance jobs.
The table that follows summarises the periodic and preventative maintenance jobs required to keep the
compressor in an efficient operational state in time.
A brief description of the running hours after which the type of maintenance job is required.
Before performing any jobs within the sound-proof cabinet, ensure that:
• The main line switch is turned off (position “0”)
• The electrical compressor switch is Off in position “0”
• The compressor is disconnected from the compressed air system
• All the pressure has been released from the compressor and internal pneumatic circuit.
The front panels are equipped with quick-release locks to facilitate maintenance and any other jobs
necessary.
Weekly : it is advisable to inspect the compressor, paying special attention to oil leaks and scale due to
settled dust and oil.
Note! If the compressor is used for more than 3000 hours/year the jobs indicated herewith
are to be performed more often.
If the compressor is used in particularly hot and humid surroundings, or in any other
harsh conditions, you need to reduce the maintenance interval times.