FHS Holztechnik GmbH
2.
Adjusting the Flow Time
The flow time has already been pre-set at the factory setting.
If you still would like to change the flow time (longer or shorter flow time), then you can do so with
the following installation steps:
The flow time can change based on varying local water pressures!
1.
Remove pressure cap as previously
described
2.
Adjust the flow time with a screw driver
(3mm width)
Carefully and with feeling, insert the
screw driver into the middle hole of the
self-closing valve
3.
Carefully, and without great exertion in
force, turn it in the desired direction
clockwise: shorter flow time
counterclockwise: longer flow time
4.
After the adjustment has been done,
press the self-closing valve once per hand
in order to test the new adjusted time.
6
Niedereimerfeld 23 * 59823 Arnsberg
Tel.: 02931 9620-0 * Fax: 02931-962050
E-Mail:
* Homepage:
