FHM WC8-PRO, Руководство по эксплуатации и запасным частям

Страница: 14 / 27

Farmer-Helper WC PRO Chipper 14 Revision 9/22/16
Further Plugging Diagnostics
There are many variables that can cause the chipper to plug
The Input Speed From Tractor
The Vegetation Being Feed
Maintenance Needed
Mechanical Adjustment Needed
-If any modification has been made to chipper it may have affected the
output process ~ Any Modifications Made?
-Verify Tractor PTO Speed Setting at 540 RPM
-Verify Tractor Engine Speed between 1800 ~ 2200 RPM
-Main Pulley Belt Deflection ~ Should be between 1/2” – 3/4” If
Adjustment is needed follow steps as outlined in the manual or call
support/service at the number below with any questions.
-Main Pulley swellable Sleeve Loose ~ Check the retaining bolts of
swellable sleeve for tightness If Adjustment is needed follow the steps as
outlined in the manual or call service/support at the number below with
any questions.
-Verify Free Spin of Flywheel Before operations.
-Verify all cleanout covers have been re-installed before operations.
-Verify Chipping Blades are sharp ~ Dullness will affect the ability for
the chipper to work efficiently.
-Verify the Bed Blade has a squared edge ~ Roundness will affect the
ability for the chipper to work efficiently.
-Verify the Chipping Blade Spacing to the Bed Blade is within normal
tolerance 0.10” ~ 0.30” = 1/10
th
” ~ 1/3”