FHM Value Leader EFGCH Series, Руководство по эксплуатации и запасным частям

Страница: 3 / 30

Farmer-Helper EFGCH Flail Mower 3 Revision 10-14-17
1. INTRODUCTION
Before using your flail mower, read and understand this operation manual and the
accompanying maintenance instructions. It contains important information which will
help you observe proper safety precautions, get the most work from your flail mower and
help prolong the life of your flail mower.
2. SETUP and ASSEMBLY INSTRUCTIONS
Y our flail mower will arrive in a metal shipping frame. This frame can be dismantled to allow
access to all parts of your mower.
See torque value chart at end of manual for all specific bolts being used.
Remove parts box, PTO driveline, side cover shield, hydraulic side shift control
frame, and then mower from crate. See picture and verify parts, see picture at end of
manual.
Attach storage stand and PTO shield as shown in picture at end of manual.
Attach hydraulic offset control frame as shown in picture at end of manual. Metal
plates go on the underside of mower deck frame. Hint-Do not tighten nuts & bolts until
all have been loosely assembled in their proper location.
Attach upper 3pt bracket as shown in picture at end of manual. Hint-Do not tighten nuts
& bolts until all have been loosely assembled in their proper location. Tighten from top-
down.
Attach 3Pt. lift pins as shown in picture at end of manual.
Lube grease points on mower and driveline (4 total points, use lithium base general
purpose grease) see picture at end of manual
Before attaching side cover, check all axle bolts and pulley screws for tightness (see
picture at end of manual). Verify belt deflection is ¼ ” to ½ ” Attach side safety cover. 1
connecting bolt (see picture at end of manual).
Fill gear box with 80-90 gear oil (Approx.
1
Qt.) Fill to full plug level in gear box to the
left side of PTO shaft. See picture at end of manual for more info.
Attach hydraulic lines to a source for actuating a hydraulic cylinder.
Completely read the rest of manual before attaching PTO driveline and operating the
mower.
Before Operation check all bolts, nuts, and zerks for tightness. Verify the
tightness of all blade retaining bolts and nuts. Check all blades for free swinging action.