12
the metal bracket, the first thing he has to do, is to fix it to the housing
floor. Subsequently, the device may be mounted on the wall.
Secure program interface
From the cast, an 8-pin, secure connecting plug comes out (
14
) (see
device overview on page 8). It is only used by the manufacturer for
programming purposes. The connecting plug is to be left blank.
Programming through the raiser is not permissible.
Secure strand connection to the installed speaker
From the casting, a secure 2-pin strand line (
16
) (see device overview
on page 8), guided to the installed speaker. It is soldered under casting
and on the speaker.
Secure strand connection to the reed contact
From the casting, a secure 2-pin strand line (
17
) (see device overview
on page 8) led to a board, on which a magnet contact (reed contact) is
found. It is soldered under casting and on the conductor board with the
magnet contact.
Secure keyboard connection
From the casting, a secure 14-pin flat band line with connector is guided
through (
7
) (see device overview on page 8)
This connector should be placed on the 14 pin pin in the casing cover
before the device is screwed down.
.
