.
Installation Manual
Locate the hook and loop strap
at the top of the seat cover and
pull the hook and loop apart.
Slide the cover over the seat-
back, gently pulling down until
the cover aligns with the seat.
Fasten the buckles located along
the side of the cover.
Lift the cover’s bottom portion
and locate the straps at the back
of the cover. Push the straps
through the seat crevice and to
the other side.
Reaching from the front of the
seat bottom, pull the straps
underneath the seat and fasten
them to the front buckles. Pull
the straps’ tabs to adjust the fit
as needed.
Place the headrest cover over
the headrest and fasten it in
place, snapping the buckle
around the elastic loop as seen
above.
If the headrest cover is too big,
you may need to remove your
headrest. Once removed, loop
the cover's elastic band
through the cover's supports.
Then snap the buckles around
the opposite side of the
supports. Reinsert the head-
rest: this should create a
tighter fit.
Example 1
Example 2
Video instructions are available at https://www.fhgroupauto.com/installation
PU206
1
2
3
4
5
6
7
