NDT 200
™
5
1
l
a
u
n
a
M
MAINTENANCE
Cleaning
The Housing should only require dusting with a soft cloth.
Operation and Storage Environment
Precautions
The NDT 200G DVR has been built to meet the demands of a professional environment, however, the
hardware is subject to the same dangers from static as any other electronic device. Use care when
connecting or disconnecting cables.
IMPORTANT:
Take care not to introduce any moisture into the unit.
Electronic assemblies are sensitive to static electricity, due to the electrostatic sensitive devices used within
the circuitry. All semiconductors, as well as some resistors and capacitors, may be damaged or degraded by
exposure to static electricity.
The video card must receive adequate ventilation, and be kept as cool as possible.
If you experience any problems with the unit please call Fast Forward Video’s service department.
DO
NOT ATTEMPT to repair or modify the unit as this might cause (further) damage,
voiding the warranty
.
A technician can determine whether your problem is caused by a faulty component, and whether you need
to return it for evaluation and/or repair.
PACKAGE CONTENTS
1
NDT 200G DVR
1
CD (USB to Serial Driver, NDT 200G and Software Manuals)
1
Mating Power Connector
PLEASE RETAIN THE ORIGINAL SHIPPING CARTON AND FOAM INSERTS
If you need to return the unit for
service or upgrade it is STRONGLY recommended that you use the original carton and foam, which were
specifically designed to protect it from damage while in transit. IF RETURNED IN A REGULAR CARTON, CARTON
WILL BE REPLACED AT A FEE FOR THE RETURN SHIPMENT.
FCC Information to the user:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user
will be required to correct the interference at their expense.
Notice to the end user:
This device has been designed to use interconnect cables with an installed length of three (3) feet or
less. Use of cables of greater length may cause undesired behavior.
