Fezz Audio Torus 5040, Руководство пользователя

Страница: 9 / 12

9
STEP 5 / OTHER AUDIO SIGNAL CONNECTIONS
TAPE OUT – line signal output for recording by the external tape deck. Tape out is a fixed volume
output.
SUB OUTPUT - connect to the input on an active subwoofer if required.
PREAMP INPUT - for connection to the unbalanced inputs of a power amplifier. To activate preamp
input, please push the switch located next to the preamp inputs.
STEP 6 / CONNECT THE POWER SUPPLY CORD
Make sure that the amplifier is switched off. Connect the power cord to the IEC socket (4) on
the rear panel of the preamplifier.
The preamplifier is designed to operate at a rated voltage of 230V / 50Hz. Connecting the
device to a mains network with incorrect parameters can lead to damage that is not covered
by manufacturers warranty.
FIRST POWER-UP AND GETTING STARTED______________________
Make sure that all of your wiring is connected in accordance with the information as provided
above.
Set the volume control to minimum. Turn on the mains power at the back of the Torus
amplifier. (5) After this time the light will turn red. Push power buton (1) to turn-ON the