6
CONNECTIONS____________________________________
The figures above shows the front and rear panel views of the Fezz Audio Sagita preamplifier,
together with the description of the inputs and outputs allowing for connection of the other
elements of your audio system.
Follow the instructions below to connect Your sound system correctly.
STEP 1 / CONNECT THE PREAMPLIFIER TO THE POWER AMPLIFIER
Sagita preamplifier has two pairs of power amplifier outputs (3). Please connect the power
amplifier to the one pair of the RCA outputs (3). If you are using two MONO power
amplifiers, please connect one to the L output, second to the R output. Select the source of
output signal by rotating the output selector (8) located on the front panel of the
preamplifier.
The quality of the connecting cable is important. Please pay attention to the output cable
quality as it can have an impact on the performance qualities of the sound.
STEP 2 / CONNECT THE ANALOG SOURCES
Connect the signal sources to the preamplifier inputs (1) Select the source of input signal by
rotating the input selector located on the front panel of the preamplifier (9). In order to
achieve the highest sound quality, use only high-quality RCA cables. Pay attention to the proper
connection and distinction of the right (R) and the left (L) channels.
DIRECT INPUT –
You can connect analog signal source (2) and bypass the Sagita`s preamplifier
volume potentiometer. You can control the volume using variable output in your player.
STEP 3 / CONNECT THE POWER SUPPLY CORD
Make sure that the preamplifier is switched off. Connect the power cord to the IEC socket on
the rear panel of the preamplifier.
Содержание SAGITA
Страница 1: ...USER S MANUAL ...